36:Load Plan Window - Revision history

64.122.111.148 at 21:50, 23 June 2006

2006-06-23T21:50:19Z

64.122.111.148 at 15:03, 26 May 2006

2006-05-26T15:03:04Z

64.122.111.148 at 22:47, 25 May 2006

2006-05-25T22:47:37Z

64.122.111.148 at 22:34, 25 May 2006

2006-05-25T22:34:08Z

64.122.111.148 at 22:26, 25 May 2006

2006-05-25T22:26:07Z

64.122.111.148 at 22:21, 25 May 2006

2006-05-25T22:21:43Z

64.122.111.148 at 21:34, 25 May 2006

2006-05-25T21:34:23Z

64.122.111.148 at 21:29, 25 May 2006

2006-05-25T21:29:25Z

67.150.91.248 at 23:19, 30 April 2006

2006-04-30T23:19:17Z

67.150.91.248 at 21:06, 30 April 2006

2006-04-30T21:06:46Z

@@ Line 5: / Line 5: @@
 [[Image:LoadPlan1.gif|500px|Image:LoadPlan1.gif|500px]]
-Enter the name of a load in the Load field.  If the Load does not exist, a new one will be set up, and created when the <OK> button is pressed.
+Enter the name of a load in the '''Load''' field.  If the Load does not exist, a new one will be set up, and created when the "<OK>" button is pressed.
 [[Image:LoadPlanNew1.gif|500px|Image:LoadPlanNew1.gif|500px]]
-Add the bin in the Bin field.
+Add the bin in the '''Bin''' field.
 ==Update an Existing Load Plan==
-Select the Load in the Load field.  You can enter the Load if known, or hit the <Control> and <A> keys to bring up a list of the available Loads.
+Select the '''Load''' in the Load field.  You can enter the Load if known, or hit the "Ctrl" and "A" keys to bring up a list of the available Loads.
 [[Image:LoadPlan2.gif|500px|Image:LoadPlan2.gif|500px]]
-Use the arrow keys to highlight the desired load, and press <Enter> to select it.  The information will fill in the fields on the Load Planning screen.  If you entered an existing Load, the information from that load will also fill in the appropriate fields.
+Use the arrow keys to highlight the desired load, and press "Enter" to select it.  The information will fill in the fields on the Load Planning screen.  If you entered an existing Load, the information from that load will also fill in the appropriate fields.
 [[Image:LoadPlan3.gif|500px|Image:LoadPlan3.gif|500px]]
@@ Line 26: / Line 26: @@
 [[Image:LoadPlanUpdate1.gif|500px|Image:LoadPlanUpdate1.gif|500px]]
-Enter the new Bin information.  Tabbing out of this field will take you to the <Update> button.
+Enter the new '''Bin''' information.  Tabbing out of this field will take you to the "<Update>" button.
 ;Note: This button is only available when you are updating an existing load.
@@ Line 32: / Line 32: @@
 [[Image:LoadPlanUpdate2.gif|500px|Image:LoadPlanUpdate2.gif|500px]]
-Press <Enter> to update the bin.Whistle will then verify that the bin is a valid bin.  If so, you will see a message:
+Press "Enter" to update the bin.  Whistle will then verify that the bin is a valid bin.  If so, you will see a message:
 [[Image:LoadPlanUpdate3.gif|500px|Image:LoadPlanUpdate3.gif|500px]]
@@ Line 38: / Line 38: @@
 ==Delete a Load==
-You can delete a Load by selecting it in the Load field.  Then, tab or arrow down to the <Delete> button.  Pressing <Enter> while the <Delete> button is highlighted will delete the selected load.
+You can delete a Load by selecting it in the Load field.  Then, tab or arrow down to the "<Delete>" button.  Pressing "Enter" while the "<Delete>" button is highlighted will delete the selected load.
 You can not delete a Load that contains an order that has pallets assigned to it.  If you try, the following message appears:
@@ Line 44: / Line 44: @@
 [[Image:LoadPlanDelete1.gif|500px|Image:LoadPlanDelete1.gif|500px]]
-Press <Enter> to continue.  You should see the following message:
+Press "Enter" to continue.  You should see the following message:
 [[Image:LoadPlanDelete2.gif|500px|Image:LoadPlanDelete2.gif|500px]]
-Press <Enter> to continue.
+Press "Enter" to continue.
 ==Add an order==
-Adding orders to the load is done by tabbing or using the arrow keys to go to the Order # field.  In this field, enter the order number, or, to see a list of all available order numbers, press the <Ctrl> and <A> keys.
+Adding orders to the load is done by tabbing or using the arrow keys to go to the '''Order #''' field.  In this field, enter the order number, or, to see a list of all available order numbers, press the "Ctrl" and "A" keys.
 [[Image:LoadPlan7.gif|500px|Image:LoadPlan7.gif|500px]]
-Select the desired order from the list, and press <Enter>.  Whistle will return you to the Load Planning screen, and the selected order will appear in the embedded result set in the middle of the screen.  If you entered or scanned the order number into the field, it would also result in adding the order to the load and displaying it in the resultset.
+Select the desired order from the list, and press "Enter".  Whistle will return you to the Load Planning screen, and the selected order will appear in the embedded result set in the middle of the screen.  If you entered or scanned the order number into the field, it would also result in adding the order to the load and displaying it in the resultset.
 [[Image:LoadPlan3.gif|500px|Image:LoadPlan3.gif|500px]]
@@ Line 63: / Line 63: @@
 ==Add an Instruction==
-You can add an instruction to this load.  Scroll to the Inst field, by tabbing or using the arrow keys.  Enter the desired instruction.
+You can add an instruction to this load.  Scroll to the '''Inst''' field, by tabbing or using the arrow keys.  Enter the desired instruction.
@@ Line 69: / Line 69: @@
-When finished, press the <OK> button to finish creating or updating the Load.
+When finished, press the "<OK>" button to finish creating or updating the Load.
 [[Image:LoadPlan5.gif|500px|Image:LoadPlan5.gif|500px]]
-Press <Enter> to continue.  You should see the following message:
+Press "Enter" to continue.  You should see the following message:
 [[Image:LoadPlan6.gif|500px|Image:LoadPlan6.gif|500px]]
-You will be taken back to the Load field, to set up another Load.
+You will be taken back to the '''Load''' field, to set up another Load.
-When finished with this screen, press the <Back> button or "Esc" to return to the Shipping menu.
+When finished with this screen, press the "<Back>" button or "Esc" to return to the Shipping menu.
 ==Removing an order==
-You can remove an order from the Load by selecting it in the embedded result set, and then tabbing or using the arrow keys to highlight the <Remove> button.
+You can remove an order from the Load by selecting it in the embedded result set, and then tabbing or using the arrow keys to highlight the "<Remove>" button.
 [[Image:LoadPlanRemove1.gif|500px|Image:LoadPlanRemove1.gif|500px]]
@@ Line 90: / Line 90: @@
 [[Image:LoadPlanRemove2.gif|500px|Image:LoadPlanRemove2.gif|500px]]
-Press <Enter> to continue.
+Press "Enter" to continue.
 [[Image:LoadPlanRemove3.gif|500px|Image:LoadPlanRemove3.gif|500px]]

@@ Line 1: / Line 1: @@
 The Load Plan window allows the user to create a load plan for shipping, or to update an existing load plan.
 [[Image:LoadPlan1.gif|500px|Image:LoadPlan1.gif|500px]]
 Enter the name of a load in the Load field.  If the Load does not exist, a new one will be set up, and created when the <OK> button is pressed.

@@ Line 18: / Line 18: @@
-Use the arrow keys to highlight the desired load, and press <Enter> to select it.  The information will fill in the fields on the Load Planning screen.  If you entered an existing Load, that information will also fill in the appropriate fields.
+Use the arrow keys to highlight the desired load, and press <Enter> to select it.  The information will fill in the fields on the Load Planning screen.  If you entered an existing Load, the information from that load will also fill in the appropriate fields.
 [[Image:LoadPlan3.gif|500px|Image:LoadPlan3.gif|500px]]
@@ Line 47: / Line 47: @@
 [[Image:LoadPlanDelete2.gif|500px|Image:LoadPlanDelete2.gif|500px]]
 Press <Enter> to continue.
@@ Line 60: / Line 59: @@
 [[Image:LoadPlan3.gif|500px|Image:LoadPlan3.gif|500px]]
 Repeat these steps to add all desired orders to this load.
@@ Line 74: / Line 72: @@
 [[Image:LoadPlan5.gif|500px|Image:LoadPlan5.gif|500px]]
 [[Image:LoadPlan6.gif|500px|Image:LoadPlan6.gif|500px]]
@@ Line 90: / Line 90: @@
 [[Image:LoadPlanRemove2.gif|500px|Image:LoadPlanRemove2.gif|500px]]
-Press <Enter> to continue.  You should see a confirmation message.
+Press <Enter> to continue.
 [[Image:LoadPlanRemove3.gif|500px|Image:LoadPlanRemove3.gif|500px]]
-Pressing <Enter> while the <Remove> button is highlighted will remove the selected order from this load.
+The list will re-display in the resultset.  Notice that the removed order is no longer in the list.
-−
 ==[[36:Load Plan Window Settings|Load Plan Window Settings]]==

← Older revision		Revision as of 22:34, 25 May 2006
Line 21:		Line 21:

	[[Image:LoadPlan3.gif\|500px\|Image:LoadPlan3.gif\|500px]]		[[Image:LoadPlan3.gif\|500px\|Image:LoadPlan3.gif\|500px]]
		+
		+	For existing Load Plans, you can also update the Bin field.
		+
		+	[[Image:LoadPlanUpdate1.gif\|500px\|Image:LoadPlanUpdate1.gif\|500px]]
		+
		+	Enter the new Bin information. Tabbing out of this field will take you to the <Update> button.
		+
		+	;Note: This button is only available when you are updating an existing load.
		+
		+	[[Image:LoadPlanUpdate2.gif\|500px\|Image:LoadPlanUpdate2.gif\|500px]]
		+
		+	Press <Enter> to update the bin.Whistle will then verify that the bin is a valid bin. If so, you will see a message:
		+
		+	[[Image:LoadPlanUpdate3.gif\|500px\|Image:LoadPlanUpdate3.gif\|500px]]

@@ Line 12: / Line 12: @@
-==Update an Existing Load==
+==Update an Existing Load Plan==
 Select the Load in the Load field.  You can enter the Load if known, or hit the <Control> and <A> keys to bring up a list of the available Loads.
@@ Line 23: / Line 23: @@
-===Delete a Load===
+==Delete a Load==
 You can delete a Load by selecting it in the Load field.  Then, tab or arrow down to the <Delete> button.  Pressing <Enter> while the <Delete> button is highlighted will delete the selected load.
@@ Line 38: / Line 38: @@
-===Add an order===
+==Add an order==
 Adding orders to the load is done by tabbing or using the arrow keys to go to the Order # field.  In this field, enter the order number, or, to see a list of all available order numbers, press the <Ctrl> and <A> keys.
@@ Line 50: / Line 50: @@
 Repeat these steps to add all desired orders to this load.
-===Add an Instruction===
+==Add an Instruction==
-You can add an instruction to this load, if desired.
+You can add an instruction to this load.  Scroll to the Inst field, by tabbing or using the arrow keys.  Enter the desired instruction.
 [[Image:LoadPlan4.gif|500px|Image:LoadPlan4.gif|500px]]
@@ Line 66: / Line 67: @@
 When finished with this screen, press the <Back> button or "Esc" to return to the Shipping menu.
-===Removing an order===
+==Removing an order==
-You can remove an order from the load by selecting it in the embedded result set, and then tabbing or using the arrow keys to highlight the <Remove> button.  Pressing <Enter> while the <Remove> button is highlighted will remove the selected order from this load.
+You can remove an order from the Load by selecting it in the embedded result set, and then tabbing or using the arrow keys to highlight the <Remove> button.
 ==[[36:Load Plan Window Settings|Load Plan Window Settings]]==

@@ Line 1: / Line 1: @@
-The Load Plan window allows the user to set up a load plan for shipping.
+The Load Plan window allows the user to create a load plan for shipping, or to update an existing load plan.
-Loading is accomplished by using the Whistle Dashboard to schedule the load operation for the Sales Order.  Then, use this window for setting up the load plan.
+[[Image:LoadPlan1.gif|Image:LoadPlan1.gif]]
 Select the Load in the Load field.  You can enter the Load if known, or select it from the drop down list of available loads.  Use the arrow keys to highlight the desired load, and press <Enter> to select it.

← Older revision		Revision as of 23:19, 30 April 2006
Line 1:		Line 1:
	The Load Plan window allows the user to set up a load plan for shipping.		The Load Plan window allows the user to set up a load plan for shipping.
		+
		+	Loading is accomplished by using the Whistle Dashboard to schedule the load operation for the Sales Order. Then, use this window for setting up the load plan.
		+
		+	Select the Load in the Load field. You can enter the Load if known, or select it from the drop down list of available loads. Use the arrow keys to highlight the desired load, and press <Enter> to select it.
		+
		+	===Delete a Load===
		+	You can delete a Load by selecting it in the Load field. Then, tab or arrow down to the <Delete> button. Pressing <Enter> while the <Delete> button is highlighted will delete the selected load.
		+
		+
		+	===Add an order===
		+	Adding orders to the load is done by tabbing or using the arrow keys to go to the Order # field. In this field, enter the order number, or, to see a list of all available order numbers, press the <Ctrl> and <A> keys. Select the desired order from the list, and press <Enter>. Whistle will return you to the Load Planning screen, and the selected order will appear in the embedded result set in the middle of the screen.
		+
		+	Repeat these steps to add all desired orders to this load. When finished, press the <OK> button to finish loading these orders. You will be taken back to the Load field, to set up another Load.
		+
		+	When finished with this screen, press the <Back> button or "Esc" to return to the Shipping menu.
		+
		+	===Removing an order===
		+	You can remove an order from the load by selecting it in the embedded result set, and then tabbing or using the arrow keys to highlight the <Remove> button. Pressing <Enter> while the <Remove> button is highlighted will remove the selected order from this load.
		+
		+	===Adding an instruction===
		+	You can add an instruction to this load. Scroll to the Inst field, by tabbing or using the arrow keys. Enter the desired instruction.
		+

	==[[36:Load Plan Window Settings\|Load Plan Window Settings]]==		==[[36:Load Plan Window Settings\|Load Plan Window Settings]]==

← Older revision		Revision as of 21:06, 30 April 2006
Line 1:		Line 1:
		+	The Load Plan window allows the user to set up a load plan for shipping.
		+
	==[[36:Load Plan Window Settings\|Load Plan Window Settings]]==		==[[36:Load Plan Window Settings\|Load Plan Window Settings]]==