GX:Studio:Catchweight - Revision history

Afc at 19:58, 12 February 2013

2013-02-12T19:58:29Z

Afc at 18:39, 12 February 2013

2013-02-12T18:39:29Z

Afc at 18:37, 12 February 2013

2013-02-12T18:37:45Z

Afc at 18:33, 12 February 2013

2013-02-12T18:33:41Z

Afc at 18:32, 12 February 2013

2013-02-12T18:32:50Z

Afc at 18:29, 12 February 2013

2013-02-12T18:29:49Z

Afc at 17:15, 12 February 2013

2013-02-12T17:15:28Z

Afc at 14:44, 12 February 2013

2013-02-12T14:44:25Z

Afc at 13:52, 12 February 2013

2013-02-12T13:52:05Z

Afc: /* Intended Use */

2013-02-11T22:47:20Z

‎Intended Use

← Older revision		Revision as of 19:58, 12 February 2013
Line 3:		Line 3:
	==Security==		==Security==
	In order to use this screen, the user must have been assigned the screen privilege "SD CATCHWEIGHT SETUP".		In order to use this screen, the user must have been assigned the screen privilege "SD CATCHWEIGHT SETUP".
		+
		+
		+	==Access==
		+	Log into Studio. On the menu on the left hand side, select "Data Setup" (see picture below, in red). Pressing that button will display a menu of data items that you have permission to set up. From that list, select "Catchweight" (see picture below, in blue). Press that button, and you will see the Catchweight table maintenance screen.
		+
		+
		+	[[Image:CWMenu.PNG\|Image:CWMenu.PNG]]

@@ Line 30: / Line 30: @@
 ===wms_ctwght_minwgt===
-Minimum allowable weight of the item. This entry must be less than or equal to the maximum weight of the field. When there is a value in this field, the netweight field must be 0 or empty, and the maximum weight field must be filled out.
+Minimum allowable weight of the item. This entry must be less than or equal to the maximum weight of the field. When there is a value in this field, the netweight field must be 0, and the maximum weight field must be filled out.
 ===wms_ctwght_maxwgt===
-Maximum allowable weight of the item.  This entry must be greater than or equal to the minimum weight of the field. When there is a value in this field, the netweight field must be 0 or empty, and the minimum weight field must be filled out.  If the ERP system you are using is Infor, this value also cannot be larger than the maximum case weight set up in the ERP system.
+Maximum allowable weight of the item.  This entry must be greater than or equal to the minimum weight of the field. When there is a value in this field, the netweight field must be 0, and the minimum weight field must be filled out.  If the ERP system you are using is Infor, this value also cannot be larger than the maximum case weight set up in the ERP system.
 ===wms_ctwght_netwt===
-Net weight of the item. When there is an entry in this field, the minimum and maximum weight fields must be 0 or empty.
+Net weight of the item. When there is an entry in this field, the minimum and maximum weight fields must be 0.
 ===wms_ctwght_tare===

← Older revision		Revision as of 18:37, 12 February 2013
Line 7:		Line 7:
	==Intended Use==		==Intended Use==
	This screen is used to set up catchweighted items in Whistle. A catchweighted (also known as random weight) item is inventory where each piece can have a different weight, and the product is priced by the actual weight of the individual piece. In contrast, a standard weight (also known as net weight) item is one that uses the same (standardized) weight for each piece.		This screen is used to set up catchweighted items in Whistle. A catchweighted (also known as random weight) item is inventory where each piece can have a different weight, and the product is priced by the actual weight of the individual piece. In contrast, a standard weight (also known as net weight) item is one that uses the same (standardized) weight for each piece.
		+
		+	==ERP System==
		+	===Infor===
		+	If you are using Infor, you need to have set up the item/pack inventory as sublotted; that is, created an entry in the in_sublot_tbl. You also need to set the fill attribute column (in_itmpk_fillattr) in the in_itmpk_tbl to a value of 2.

@@ Line 11: / Line 11: @@
 ==Example Usage==
 New Item #23 is catchweighted, and Whistle needs to know the various weights associated with the item.
 ==Columns==
 There are certain rules associated with entries made in some columns.  This will provide an overview of what is required to be in the various columns of this table.
 ===in_item_key===

@@ Line 29: / Line 29: @@
 ===wms_ctwght_maxwgt===
-Maximum allowable weight of the item.  This entry must be greater than or equal to the minimum weight of the field. When there is a value in this field, the netweight field must be 0 or empty, and the minimum weight field must be filled out.
+Maximum allowable weight of the item.  This entry must be greater than or equal to the minimum weight of the field. When there is a value in this field, the netweight field must be 0 or empty, and the minimum weight field must be filled out.  If the ERP system you are using is Infor, this value also cannot be larger than the maximum case weight set up in the ERP system.
 ===wms_ctwght_netwt===

@@ Line 38: / Line 38: @@
 ===upc_key===
-Typically unused.  Value now comes from ERP.
+Typically unused. This value now comes from the ERP system.
 ===wms_ctwght_scc===
-Typically unused.  Value now comes from ERP.
+Typically unused. This value now comes from the ERP system.
 ===wms_ctwght_freeze===
-Number of days to offset the production date for freeze.
+This is the number of days to offset the production date for freeze.
 ===wms_ctwght_peel===
-Number of days to offset the production date for peel.
+This is the number of days to offset the production date for peel.
 ===wms_ctwght_backdt===
-Number of days to offset the production date backwards for backdating (future dating not permitted even if this value is set to a negative value).
+This is the number of days to offset the production date backwards for backdating.
 ===wms_ctwght_sell===
-Number of days to offset the production date for sellby.
+This is the number of days to offset the production date for sellby.
 ===defaultitem===
-Customer specific entry.
+Customer specific entry, not generally used.
 ===boxcode===
-An entry that permits like containers to track the tares by tare-group instead of by the item. (Customer specific entry).
+An entry that permits containers with the same inventory contents to track the tares by tare-group instead of by the item. Customer specific entry, not generally used.
 ===minPieces===
-Minimum number of pieces permitted per case.
+This is the minimum number of pieces permitted per case.
 ===maxPieces===
-Maximum number of pieces permitted per case.
+This is the maximum number of pieces permitted per case.
 ===minPieceWeight===
-Minimum average pieceweight for case (average pieceweight is case netweight / # pieces).
+This is the mMinimum average pieceweight for case (average pieceweight is case netweight / # pieces).
 ===maxPieceWeight===
-Maximum average pieceweight for case.
+This is the maximum average pieceweight for case.
 ===target_pieces===
-Target number of pieces (how many you're trying to pack) for a case.
+This is the target number of pieces (how many you're trying to pack) for a case.
 ===ECOLotsOnly===

← Older revision		Revision as of 14:44, 12 February 2013
Line 1:		Line 1:
	[[Image:Catchweight.png\|thumb\|1000px\|Image:Catchweight.png\|thumb\|1000px]]		[[Image:Catchweight.png\|thumb\|1000px\|Image:Catchweight.png\|thumb\|1000px]]
		+
		+	==Security==
		+	In order to use this screen, the user must have been assigned the screen privilege "SD CATCHWEIGHT SETUP".
		+

	==Intended Use==		==Intended Use==

@@ Line 2: / Line 2: @@
 ==Intended Use==
-This screen is used to set up catchweighted items. A catchweight (also known as random weight) item is inventory where each piece can have a different weight, and the product is priced by the actual weight of the individual piece. In contrast, a standard weight (also known as net weight) item is one that uses the same (standardized) weight for each piece.
+This screen is used to set up catchweighted items in Whistle. A catchweighted (also known as random weight) item is inventory where each piece can have a different weight, and the product is priced by the actual weight of the individual piece. In contrast, a standard weight (also known as net weight) item is one that uses the same (standardized) weight for each piece.
 ==Example Usage==
-New Item #23 is catchweighted, and Whistle needs to know the various weighs associated with the item.
+New Item #23 is catchweighted, and Whistle needs to know the various weights associated with the item.
 ==Columns==
-===Item - in_item_key===
 The item to be catchweighted.
-===Pack - im_pack_key===
+===im_pack_key===
 Pack entry of item to be catchweighted.
-===UCC128 - ucc128_item===
+===ucc128_item===
 Unique item number.
-===Min Weight - wms_ctwght_minwgt===
+===wms_ctwght_minwgt===
 Minimum allowable weight of the item.
-===Max Weight - wms_ctwght_maxwgt===
+===wms_ctwght_maxwgt===
 Maximum allowable weight of the item.
-===Net Weight - wms_ctwght_netwt===
+===wms_ctwght_netwt===
 Net weight of the item.
-===Tare - wms_ctwght_tare===
+===wms_ctwght_tare===
 Weight of packaging to be taken out of the weight.
-===UPC - upc_key===
+===upc_key===
 Typically unused.  Value now comes from ERP.
-===SCC - wms_ctwght_scc===
+===wms_ctwght_scc===
 Typically unused.  Value now comes from ERP.
-===Freeze By - wms_ctwght_freeze===
+===wms_ctwght_freeze===
 Number of days to offset the production date for freeze.
-===Peel By - wms_ctwght_peel===
+===wms_ctwght_peel===
 Number of days to offset the production date for peel.
-===Back Dt - wms_ctwght_backdt===
+===wms_ctwght_backdt===
 Number of days to offset the production date backwards for backdating (future dating not permitted even if this value is set to a negative value).
-===Sell By - wms_ctwght_sell===
+===wms_ctwght_sell===
 Number of days to offset the production date for sellby.
-===Default Item - defaultitem===
+===defaultitem===
 Customer specific entry.
-===Tare Group===
+===boxcode===
 An entry that permits like containers to track the tares by tare-group instead of by the item. (Customer specific entry).
-===Min Pcs - minPieces===
+===minPieces===
 Minimum number of pieces permitted per case.
-===Max Pcs - maxPieces===
+===maxPieces===
 Maximum number of pieces permitted per case.
-===Min PWgt - minPieceWeight ===
+===minPieceWeight===
 Minimum average pieceweight for case (average pieceweight is case netweight / # pieces).
-===Max PWgt - maxPieceWeight===
+===maxPieceWeight===
 Maximum average pieceweight for case.
-===Target Pcs - target_pieces===
+===target_pieces===
 Target number of pieces (how many you're trying to pack) for a case.

← Older revision		Revision as of 22:47, 11 February 2013
Line 16:		Line 16:

	2) the net weight column (wms_ctwght_netwt) in the table wms_ctwght_tbl is greater than 0.		2) the net weight column (wms_ctwght_netwt) in the table wms_ctwght_tbl is greater than 0.
−
−

	==Example Usage==		==Example Usage==